Automated Access Specialists 

  info@beninca.co.uk

+44 (0) 1488 658 276
+44 (0) 1488 658 276

UNBEATABLE BUILD QUALITY

100% Italian made

30 MONTH WARRANTY

Our hardware is covered

DEDICATED SUPPORT TEAM

We’re always here to help & offer advice

TRAINING

Support & training. Be Connected

Menu

LD113/LD213 DUAL CHANNEL LOOP DETECTOR

12/24v Card loop detectors

SKU LD113/LD213 Categories , Tag

Description

LD113 – 12/24Vac/dc Single Channel Card Loop Detector
LD213 – 12/24Vac/dc Dual Channel Card Loop Detector

LC100 – 100m of loop cable
LC500 – 500m of loop cable

More commonly used for a free exit or a safety device, the Procon LD113 / LD213 is a relay offering pulse or presence relays and can switch between Detect and Un-detect. The detector is connected to an inductive loop inserted into the road surface. When vehicles pass over the loop the detector switches a relay.

This output can be used for a number of functions-
Free entry
Free exit
Safety
Arming loop for presence for intercoms or swipe systems operated by vehicles to avoid unwanted calls etc….
Count systems
Traffic control systems
Directional control using the A-B logic

The LD113 or LD213 is the perfect choice for the installer. The advanced features will aid any installation with the LED status lights and the very wide range of sensitivity settings. You also have features such as the ABS, frequency and extended time feature.

Installation advice

The key factor of any induction loop is the ground condition it is going to be cut into. There are many ways to install induction loops and in many shapes and sizes. There are no set shapes but the basic rectangle is the most common. Installed into the road or pathway, the induction loop should be positioned where it will detect what passes over it at all times. The induction loop works with the principle of magnetic detection from the mass of a moving vehicle and not a pressure pad as sometimes thought.

The most common loop installation is to cut a slot in the road to the approximate depth of 50mm x 6mm in a rectangle shape with a feeder slot cut back to the control panel or controller. Once the cables have been laid and pushed down into the slot this should be backfilled with a hot melt road tar or appropriate sealant.

 

 

 

 

 

 

 

 

The slot needs to be clean and free from dust and water.

Starting at the controller position, install the induction cable into the slot being careful with the corners and not pulling it too tight(when cutting the loop slot, cut the corners at 45 degrees to eliminate the sharp 90 degrees corners). Install the cable with 3 complete circuits and pull the cable along the feeder slot to where the controller is positioned.

From the rectangle position, twist the feeder cable to approx 20 turns per metre and wire both cores directly into the relay.

Additional information

Channels

1 Channel, 2 Channel

Voltage

24Vdc

Loop Style

Traditional

Loop Function

Safety and Presence

Brand

Procon

Download Datasheet

How to order

As a trade customer, call us today on 01488 658 276 or email your enquiry to sales@beninca.co.uk. We can take your order over the telephone, via email, or in person with one of our sales reps at our trade counter. Apply for a trade account today here. Beninca Automation UK Ltd does not sell to the end-user, our equipment is designed specifically for professional gate and security installers who have received adequate levels of training.

Delivery

We hold over £1Million worth of stock at our premises in Newbury, Berkshire. For all items in stock, we aim for same-day dispatch for all orders received before 14:00 pm. For orders that include made to measure safety edges, our cut of time for same-day dispatch is 11:30 am. We use various third partner courier companies and all goods are dispatched on a next delivery basis. Timed deliveries are available upon request.

Returns & Warranty

All Benincà Group products bought directly from Benincà UK, are covered by a 30-month warranty from the date of installation and must be registered using our online form. If the installation is not registered, the 30-month period is valid from the date of invoice.

If goods are suspected to be faulty within the warranty period, please complete the returns form

Related products

Unbeatable quality

All Benincà Group products are 100% Italian made and produced to the highest build quality. Every product undergoes extensive quality control checks, ensuring they are produced to the premium class we are renowned for.

30-month warranty

We offer piece of mind with all Benincà products, as standard they come with a set 30-month warranty. Our products are built to last, however if for some reason you do encounter an issue, you will be covered.

Dedicated support

We pride ourselves on delivering exceptional customer service, both pre and post-sales. Our team of experts are on hand to provide you with any support, this can be delivered via the telephone, over email, on-demand via WhatsApp or in person.

Huge UK stock levels

With a 10,000 square foot warehouse, we hold a substantial amount of stock, ensuring we continuously meet our customer needs. Our stock is regularly replenished with goods arriving in from Italy every few weeks.

X
Open chat
1
Hi, how can we help you?
Shopping cart close