12/24v 1ch Probe vehicle detector

Key features.

  • Easy to install – no need to cut induction loops
  • Quality brand, guaranteed reliability
  • 15m and 30m cable lengths to suit all applications
  • Easy to set up controller with LED detection indicator
  • Can be used for presence and pulse

Technical specification.

  • 12/24Vdc Power input
  • Adjustable sensitivity
  • Adjustable detection zone, X,Y and Z axis
  • Can be installed underground or on static post/side of a driveway
  • 5 Minute presence reset

Product information

The MD102 is a magnetic resistive probe which is used to measure the earth’s magnetic field. Any change in the magnetic field due to the presence of a vehicle will be detected resulting in a signal output. The probe can measure the magnetic field in 3 axis, namely the X, Y, and Z axis. Each axis can be individually enabled to optimise vehicle detection. Normally all 3 axis would be enabled.

The MD102 probe can be buried in the road surface underneath the vehicle, alongside the vehicle or can be mounted above the ground next to the passage of the vehicle. The probe can be used to produce a pulse output or a presence out. The presence out will detect the vehicle indefinitely.

The MD102C is a control unit which enables configuration and testing of the MD102. DIP switches are used for configuration and LED’s are used for visual indications of the operation of the probe. A relay output switches ON when a vehicle is detected. The MD102 has been designed for parking and access control applications and is a cost-effective solution for detecting vehicles in order to facilitate the automatic opening of security gates. It requires a minimal amount of cutting in the road surface.

MD102 Controller & Probe

Part numbers

MD102C – 12/24Vdc Controller – one required for each loop / probe
MD102 – 10 – Magnetic vehicle detection probe with 10m cable
MD102 – 15 – Magnetic vehicle detection probe with 15m cable
MD102 – 30 – Magnetic vehicle detection probe with 30m cable


Product enquiry...

Do you want to know more about this product? Complete the short form below and we will get in touch with you.

Please note: The information we collect on this form will be used to contact you regarding your enquiry. Your details will only be used by Beninca Automation UK Ltd. We will not sell, share or distribute your contact details with any third party, unless required to by law. For full details on how we use your information, see our Privacy Policy.

* Required