Did You Know? You can link up to 4x RF transmitters into each of the two channels of the SC.RF receiver, making them extremely versatile and cost-effective for your wireless safety edge requirements.
There are numerous safety measures and products we can recommend for electric gate installs depending on the requirements and circumstances, however the most popular and common gate safety device to add is rubber contact safety edges.
Our RF transmitter and SC.RF receivers are the perfect wireless solution for safety edges, as they are so quick and easy to install.
Our RF single channel transmitter works with the SC.RF receiver on 868Mhz frequency for wireless safety edge transmission. You can program up to 4 x RF transmitters into each of the two channels of the SC.RF receivers, making them extremely versatile and cost-effective for your safety edge requirements.
The transmitter is available in two models; as standard the RF unit is battery powered with 2 x AA batteries with a 2 year expected battery lifespan. Alternatively, the RF.SUN model incorporates a small solar panel that will recharge the battery which will trickle charge the battery all year round. The RF & SC.RF is also available in an 869Mhz frequency with both models utilising a N/C or 8K2 input.
If you would like to find out more detail about our Benincà RF transmitter, SC.RF receiver, or any of our other gate safety products, please click here. Alternatively, if you have a question for our team, please do get in touch, you can reach us on 01488 658276 or email@example.com
The ONE.2WB is a 2 channel boxed 433.92Mhz radio receiverthat needs to be added within the enclosure and control panel upon installation. This can sometimes be difficult due to limited space and so, we’dlike to draw your attention to the sister product, the ONE.2WO.
Both the ONE.2WB and ONE.2WO are almost identical, as they are both capable of storing up to 512 transmitters and with 2 channels working on a 433.92Mhz frequency. However, theONE.2WO has an IP rated enclosure, meaning it can be mounted externally, for example; directly to a garage door or post, as it is completely weatherproof.
If you have any questions regarding the above products, please do get in touch. You can also download the datasheet here.
Our TO.GO transmitters are small but mighty andare the most important element of an install for the end user, allowing them control of their systemby a simple click of a button.
Over time, Benincà have improved the TO.GO transmitters and previous editions such as the TO.GOWV have been discontinued and made way for the newTO.GOVAtransmitter, available in both 2 and 4 button options. The TO.GO2VA and TO.GO4VA are super secure with 128bit advanced rolling code technology.
ARC Technology: Delivering higher levels of security and reliability.
Thanks to the length of its transmitted code, our new 128bit Advanced Rolling Code (ARC) provides maximum security.Compared to the older 64bit rolling code, the new ARC technology offers a transmitter that is virtually impossible to clone.
The TO.GOVA transmitter is equipped with dual coding, which means it can be set to Advanced Rolling Code (128bit) and standard Rolling Code (64 bit).
As standard, the TO.GOVA comes with 128bitencryption, so is suitable and requires no adjustments for new installs. However, acommon issue flagged by installers upon purchasing a new 128bit transmitter, is that the new transmitter is not compatible with existing and older equipmentwhich isset to 64bit. The dual coding solves this problem, allowing the installer the option to switch the transmitter to the required 64bit code (HCS), with a simple two button sequence.
The video below gives instructions onhow to change a TO.GOVA code type:
As you can see from the video there are some simple steps you can perform to switch the TO.GOVA code type, however, if you do have any further questions our technical team would be happy to assist.