ONE.4WB 4 CHANNEL VALIDATING RECEIVER

ONE.4WB 4 Channel Validating Receiver

• The ONE.4WB 4 Channel Validating Receiver is a 4-channel receiver with wide-range power supply (90÷255 Vac)
• Triple coding: Advanced Rolling Code, Rolling Code and Fixed Code
• ARC coding guarantees maximum security due to the length of the transmitted code (128 bit) and the high number of possible combinations
• The first transmitter associated sets the type of coding accepted by the receiver
• Compatible with the Advantouch programmer, which permits simple, quick management of systems with many users, as well as updating of firmware of the receiver
• Equipped with cabled inputs, 4 250V 5A relay outputs and a removable EEprom memory device with 512 codes
• Possibility to set the type of contact to use in the inputs (NO or NC)
• The output relay switching types can be set as monostable, bistable or time-phased
• Possibility to set a password on the display to guarantee maximum security against tampering by third parties
• The new “rEcn” function permits consultation and viewing of the positions of memorised transmitters and then to proceed to delete individual transmitters easily and quickly “SAFE” operation logic can be activated on alarm systems: channel 1 activates only if pressed for over 3 sec
• Outdoor IP44 box

Accessories

With such a large UK stock holding we pride ourselves as a one-stop shop for the automated access industry. From keypads to key switches and from power supplies to loop detectors, you are in the right place. Take a look at all the possible accessories for your automation needs.

Also, if you require additional information or assistance, please do not hesitate to reach out to our dedicated sales team. You can contact them directly by phone at 01488 658 276 or via email at Info@beninca.co.uk. We are here to support you and address any inquiries you may have.