IR/IT 2241 Wall-Mounted Encoding Photocells for Enhanced Gate Safety
Elevate the safety of your automated gates with our innovative IR/IT 2241 wall-mounted encoding photocells. These photocells distinguish themselves with a battery-operated Transmitter function, a 180° rotation capability, and an impressive range of up to 16 meters.
The battery-operated feature of the IR/IT 2241 photocell eliminates the need for intricate electrical cable setups to connect the transmitter, simplifying the installation process. The unique code assigned to the transmitted signal during installation minimizes the risk of interference with other devices. Additionally, the design allows the circuit to be oriented inside the box, enabling alignment of the transmitter with the receiver while safeguarding against reception from other devices.
Installing and configuring the IR/IT 2241 photocells is exceptionally straightforward. To assist installers, we have created a user-friendly quick start guide, accessible by clicking on the downloads tab. Ensure a hassle-free installation process and optimal performance for your gate safety.
- Max. range : 16 metres
- TX power supply : 1 x 1,5V Alkaline batterymod. AA
- RX power supply : 12-24V AC-DC
- TX absorption : 0.30 mA Max.
- RX absorption : 25 mA Max.
- Relay contact capacity : 1A max at 30 VDC
- Operating temperature : -10 ÷ 55°C
- Container : Polycarbonate
- Protection rating : IP 54
- Container dimensions : 41 x 94 x 45 mm
With such a large UK stock holding we pride ourselves as a one-stop shop for the automated access industry. From keypads to key switches and from power supplies to loop detectors, you are in the right place. Take a look at all the possible accessories for your automation needs.
Also, if you require additional information or assistance, please do not hesitate to reach out to our dedicated sales team. You can contact them directly by phone at 01488 658 276 or via email at Info@beninca.co.uk. We are here to support you and address any inquiries you may have.