Description
E-LOOP Inground Kit – Wireless Vehicle Detection System
Introducing a new concept in wireless vehicle detection. The e-Loop inground kit replaces traditional wired inductive loops, saving time and money while increasing reliability
Installation in 3 simple steps:
1. Code in the e-Loop.
2. Core bore 89mm hole 70mm deep and secure using flexible mastic.
3. Calibrate the e-Loop… and you’re ready to operate in less than 30 minutes. Save many hours of installation time compared to wired loop systems.
Save many hours of installation time compared to wired loop systems.
KIT CONTENTS:
- 1x e-Loop wireless inground module.
- 1 x single channel transceiver.
- 1 x magnet
The E-loop Inground Kit is a Wireless Vehicle Detection System that uses magnetometer sensors to detect the presence and movement of vehicles. These detections are transmitted to a nearby transceiver for gate activation. The sensors are installed in the ground of entry or exit passages using sikaflex, contain a replaceable LIthium battery, and can withstand almost any vehicle. Gate or door controller must have a dedicated open input and autoclose function enabled.
Download Datasheet
