Description
E-LOOP WIRELESS DETECTION KIT – Wireless Vehicle Detection System
Introducing a new concept in wireless vehicle detection. The e-Loop wireless detection kit replaces traditional wired inductive loops, saving time and money while increasing reliability
Installation in 3 simple steps:
1. Code in the e-Loop
2. Secure the e-Loop to the driveway
3. Calibrate the e-Loop… and you’re ready to operate in less than 15 minutes. Save many hours of installation time compared to wired loop systems.
KIT CONTENTS:
- 1 x e-Loop wireless detection module.
- •1 x 12–24VDC single channel transceiver (or option LCD e-Trans 200 transceiver).
- •2 x Concrete fixing bolts.
- •1x Magnet.
The Commercial Wireless Vehicle Detection System uses magnetometer sensors to detect the presence of oncoming vehicles.These detections are transmitted to a nearby transceiver for gate activation. After the vehicle is detected, the e-loop will switch to radar mode. The sensors are installed on the surface of entry or exit passages using concrete fixing bolts, contain four replaceable Lithium batteries, and can withstand almost any vehicle
Download Datasheet
