Description
Sam Articulated Arm for Swing Gates
Sam Articulated Arm for Swing Gates | 24 Vdc | Intensive use
- 24 Vdc electromechanical operator for intensive use with integrated control unit and receiver
- The incorporated control unit can be accessed from above. It is placed on removable support that facilitates installation and quick access to mechanical stops. This way, the actuator can be installed flush with the floor
- Switching power supply (115/230 Vac) that permits reduced power use and long lifespan of the actuator
- Ideal for swing gates with large columns and leaf hinges up to 280 mm deep
- Suitable for any setting, thanks to the reduced overall dimensions (only 170 mm of width)
- The encoder guarantees maximum safety and precision while the gate is moving
- Sturdy arm fitted with a closing lock that helps define the limit switch position during installation
- Motor fixing bracket fitted with a cable gland to facilitate maintenance
- Equipped with mechanical stop in opening
- STC system device enables torque management in relation to the position of the gate, which guarantees maximum safety
- Operation guaranteed even in the event of a power supply failure through batteries that integrate perfectly into the motor
- Amperometric sensor obstacle detection system to prevent crushing
- Possibility for encoder- or time-based operation even independently between the two motors
- Designed for the connection of the X.BE accessory in order to be integrated with KNX domotics installations and the programming through the app BeUP and the interface PRO.UP
- Option of adjustable wire unlock device that allows opening from the outside in the event of a power supply failure
Control Unit: CP.SAM
Download Datasheet
