Electromechanical underground operator

Key features.

  • Irreversible electromechanical geared motor
  • 24v and 230v motors equipped with an encoder (24NVE, 14NE and NVE)
  • Encoder device to provide maximum safety and precision in operation
  • Built-in physical stops in open and close
  • Faster version (NV and NVE)

Technical specification.

  • 180-degree opening options (using conversion kit)
  • No nylon parts, full metal mechanics
  • Amperometric sensing obstacle detection (24v motors)
  • Gate shoes designed with grease nipple for easy maintenance
  • Suitable for gate leaf’s up to 3.5m (N, NE, 24NVE)

Product information

Electromechanical, irreversible, geared underground gate operator with built-in stops.

DU.IT14N – 230Vac Underground operator for gate leafs up to 3.5m – built in stops
DU.IT14NV – 230Vac Underground operator for gate leafs up to 2.1m – built in stops

DU.IT14NE – 230Vac Underground operator for gate leafs up to 3.5m – with encoder and built in stops
DU.IT14NVE – 230Vac Underground operator for gate leafs up to 2.1m – with encoder and built in stops
DU.IT24NVE – 24Vdc Underground operator for gate leafs up to 3.5m – with built-in stops & with built in encoder


Control panel & features

DU.IT kits are supplied with the full feature BRAINY control panel.


  • Step by step input
  • Electronic force adjustment
  • Diagnostics LCD display
  • Built in 433.93Mhz radio receiver
  • Separate encoder inputs for each motor
  • Separate slow down during open and close for each motor
  • 8.2Kohm Safety edge input – wire direct into the board
  • Maglock / lock output

Part numbers

DU.IT14N – Motor Only – 230Vac
DU.IT14NV – Motor Only – 230Vac

DU.IT14NE – Motor Only – 230Vac (encoder)
DU.IT14NVE – Motor Only – 230Vac (encoder)
DU.IT24NVE – Motor Only – 24Vdc (encoder)

Kit codes

Our kits come complete with the following:
1 x Control panel
1 x Pair of PUPILLA photocells
1 x 433.92Mhz aerial long-range aerial
2 x TO.GO 2 button transmitters (rolling code or programmable code/fixed code)

KDU.IT14N – Pair Kit – 230Vac
KDU.IT14NV – Pair Kit – 230Vac
*Please note N and NV kits (without encoder) are designed as ‘entry-level’ complete sets, therefore they are supplied with the HEADY control panel and PUPILLA.F fixed lens photocells

KDU.IT14NE – Pair Kit – 230Vac (encoder)
KDU.IT14NVE – Pair Kit – 230Vac (encoder)
KDU.IT24NVE – Pair Kit – 24Vdc (encoder)

KSDU.IT14N – Single Kit – 230Vac
KSDU.IT14NV – Single Kit – 230Vac

KSDU.IT14NE – Single Kit – 230Vac (encoder)
KSDU.IT14NVE – Single Kit – 230Vac (encoder)
KSDU.IT24NVE – Single Kit – 24Vdc (encoder)

Product enquiry...

Do you want to know more about this product? Complete the short form below and we will get in touch with you.

Please note: The information we collect on this form will be used to contact you regarding your enquiry. Your details will only be used by Beninca Automation UK Ltd. We will not sell, share or distribute your contact details with any third party, unless required to by law. For full details on how we use your information, see our Privacy Policy.

* Required